• anneaux

The Vacuum sealing ring is made with silicone.

It is suitable only for use in prostheses of the lower and upper extremities. The use of the ring is intended for use with almost all fabric-coated liners from silicone, polyurethane or TPE.

The advantage of this silicone ring is that a vacuum is created between the socket and the liner so that the prosthesis is held against the body without the need for a knee cap or locking device.


The ring needs to be glued on the liner. You will have to use a specific silicone glue which can be ordered with the ring, or alone.
One glue stick contains 90 ml (4/5 applications).

The use of a spray is also recommended before donning the ring in order to make the installation easier. You can order this spray too.

The video below shows you how to position and fix the ring on the liner :




Ref. Ring

Ref. Ring + Glue
(90 ml)

Size

Circumference

1S950-12

1S950-02

2

16-22 cm

1S950-13

1S950-03

3

20-38 cm

1S950-14

1S950-04

4

30-48 cm

1S950-15

1S950-05

5

40-55 cm



Ref. Glue (90 ml) Ref. Spray
XC950 1S950-90

PROTEOR Group Legal Disclaimers Links Site Map Training Archive © 2015 PROTEOR - All rights reserved - Reproduction, in whole or in part, is strictly prohibited.